SIRT OneShot Laser Pulse Module
By default, the SIRT Model 110 training pistol keeps the shot laser on for as long as the trigger is held. Our SIRT OneShot plug-in module transforms that behavior by producing a precise, timed laser pulse – simulating a single shot per trigger pull. The pulse duration is approximately 55 milliseconds, perfectly calibrated for compatibility with Shooter Make Ready laser targets, ensuring one hit is registered per shot.
Easy Installation
The OneShot module installs in minutes, plugging directly into the SIRT pistol’s existing laser module connector – no permanent modifications required.
See installation instructions here:
Model Compatibility
The SIRT OneShot module is compatible only with the SIRT Model 110 (Glock 17/22 platform).
It is not compatible with the following models due to different internal designs:
SIRT Model 115 / 115C / 115S
SIRT Model 107 (S&W M&P)
SIRT Model 20 / 20C (SIG P320)
SIRT Pocket Pistol models
We do not currently offer a pulser module for these models. For these platforms, we recommend contacting NextLevel Training about their “visible pulse option”, which provides a shorter (44ms) laser pulse.
Using Non-Pulsing SIRT Models with Our Targets
Many users are successfully using non-pulsing SIRT models with our laser targets. If the trigger break-to-reset event is quick, the result is a short pulse from the shot laser which is picked up by our laser targets as one-shot-one-hit. However, holding the trigger too long or excessive muzzle movement during the shot may cause multiple hits to be detected.
While our targets can work with non-pulsing lasers under certain conditions, we strongly recommend using a pulsed laser for best results, especially for newer or less experienced shooters.
Charles Scarratt (verified owner) –
Excellent product. Without it, the SIRT shot laser stays on until you allow the trigger to reset. Before I found the OneShot, I found I was developing some bad habits with the laser staying on because that sometime when I hit close, outside the edge of the target, I’d drag the laser onto the target activating the target. The limited laser pulse enabled by OneShot, solved the problem, at a very affordable price
Be sure to read the instruction and watch the video, then the install can then be done in less than 5 minutes.
Look closely at the AFT targets as well. I didn’t look close enough at them, when I bought my OneShot, but after interacting with AFT to help me with a SIRT related issue I was having, they were mentioned. I went back and looked closer at them and found that compared to a number of other laser targets I already have they really look superior. I’ve ordered 2 and will post a review on them after I play with them.
AFT makes great products and can be super helpful, if you have questions or issues.
thepidler (verified owner) –
Bought the one shot when I picked up my target 4 pack. Made such a difference in my SIRT dry fire work. It works exactly as designed and expected. I have used it heavily (for a reg citizen) for 3 years now – not a single issue. Great products!
d3varms (verified owner) –
The SIRT OneShot is easy to install and works great with the Laser Targets. Highly recommended!
jerryjohnson (verified owner) –
I bought the Shooter Make Ready system and five targets after seeing it at the NRA Convention. It is easy to set up and use, and I configure it for practice for Steel Challenge and USPSA. I also occasionally bring it to work and we use it in the office! It gives me an easy to use dry fire solution with feedback and is a valuable part of my training. I highly recommend it.